Modchip-wizard™ Wii Mods & Wii Console Mod-chips
Wii D2CKey Installation diagrams / Install guides for all wii mod chips on all DMS D2A D2B D2C wii chipset types .
D2PRO : a new chip for the D2C chipset called D2PRO. It only uses 15 wires, but is reported to be as stable as D2Ckey.
D2PRO is using the Actel A3P architecture, and is fully updatable via D2prog, an external USB programmer. The D2PRO is different from the D2C Pro which is a 32 wire installation for D2C Wii consoles. D2Pro Pictures here.
ARGON : Infectus has released a new bios for D2C Wii mod chip Argon which works on all Wii D2C Drive boards this chip has only 9 wires to install and is flash upgradable. The Argon Bios works on Australian USA European and Japanese Wii Consoles. Wii Argon Install Pictures here. Argon is currently the best Wii D2C Modchip option. Argon Modchip for Wii Developements : the NEW Wasabus Bios has been released to install Argon on all early model Nintendo Wii consoles - Team Infectus has also released Beta Test versions of the PS2 Bios to run on The D2C Wii Modchips.
ARGON D2C - A high quality solution for your Wii console.
Wii Argon Chip Install
Wii D2C Pro - D2C Wii Mod chip - Easy Board installation board packaged with D2C Pro Modchip Kits. Same installation as D2CKey but has an optional modchip Disarmable mode - One optional extra wire to solder during installation. D2CPro install Diagrams Here.
Direct boot of Wii and Gamecube games, on-the-fly region patching, audiostreaming fix and more.
D2CKey has been designed with user simplicity in mind. After installation (which, in all fairness, should be left to a professional!), it just works. There is no need to set up, reflash, upgrade, or fiddle around. D2Ckey automatically detects what kind of disc is inserted, and configures the drive accordingly. Original and backup original Wii and Gamecube games from different regions with the same video system boots directly, and even a lot of games from regions with different video system can be booted directly. Gamecube audiostreaming fix is built-in from the start.
Compatible with most DVD+/-R and RW media (no bitsetting required) and multigame discs.
DVD-R, DVD+R, DVD-RW, Dual Layer DVD, bitsetting... finding the right recordable media and the right burner isnt always that easy. Some kinds and brands of media and recorders might work better with the Wii drive than others. D2Ckey offers support for most of them from the start, making it simpler for you. While a certain media, burner, or combination might not work properly with a certain drive, it will be easier to find a working combination knowing that d2ckey supports most of the common recordable media types.
350MHz Performance with advanced AES128 bit encryption, yet runs on an ultra-low-power core.
The overall system performance of D2Ckey is 350Mhz, compared to around 8MHz for serial-port based modchips.
D2Ckey uses the latest flash-based FPGA technology from Actel, which has many powerful features. It has a super-fast, ultra-low-power 1.5V core that will literally remain cool all the time. This means no strain on your Wii (and there is no need recalculate your carbon footprint).
Another powerful feature is that the programming is protected by powerful AES128 encryption, making reverse engineering attempts infeasible. Therefore it will be very difficult to find a way to detect or block the chip in any way in the future. In the past modchips and smartcards using less secure devices have eventually been hacked, making it possible to detect them and lock out modified systems. An example of this are self-updating d2mac and unofficial Conax satellite tv cards, whose MK's have been revoked, rendering the card inoperable.
Integrates a next-generation ICMS to ensure stability during loading and gameplay.
The first generations of Wii drive controllers - known as DMS, identical to D2A, and D2B all had a serial port interface that could be used to inject code, making it possible for backup discs to load (and enable other funky stuff as well).
Albeit easy to install, modchips that uses the serial port have some disadvantages. Due to the way they interact with the drive controller it is possible for the Wii hardware to detect them (they modify RAM, for example).
This way of modifying the Wii does not work with the D2C controller, because the serial port can no longer be used to inject or modify code.
D2Ckey uses a new approach we call the Intelligent Code Modifying System (ICMS). Instead of just uploading some code and then doze off, ICMS constantly monitors data on address and data buses, patching it if necessary. This has several advantages:
- It is virtually undetectable by the Wii hardware
- Improved reading of recordable recordable media
- Backup disc loading will emulate original game disc loading closer
By interfacing more of the circuitry of the drive controller D2Ckey has a better understanding of what is going on inside. Stability and compability have been the main design objectives.
A good example of the dangers with oversimplified chips are the 4-wire PIC12C508-based PS1 modchips that where very popular around 1997. First, Microchip, the manufacturer of PIC chips, made some changes in the manufacturing process, affecting the in-system clock. This was technically not a manufacturing flaw, as the fault was still within the tolerance specified in the datasheet, but the chips stopped working. If the 5th wire, a clock signal from PS1, had not been stripped (the 5-wire modchips still using the PS1 clock did not have any problems) then there would not have been any problems. Shortly after games appeared that detected active modchips - once again, a few extra wires would have enabled the chip to know when (and when not to) send data.
Access control LEDs
- LED 1: disc access indicator.
- LED 2: data patching indicator
- Flashes smoothly during disc insertion and detection
- Lit when backup is detected (after disclogin)
- Off when original is detected
DVD media compability
- DVD+-R
- DVD+-RW
- Dual-layer DVD (movies and GCOS)
Game disc support
- Direct boot of Wii original and backup games from the same region
- Direct boot of Gamecube original and backup games from the same region
- Direct boot of different NTSC region Wii and GC games on USA and JAP consoles
- Partial region free support on Wii and GC original and backup games with different videomode (ie PAL<->USA, JAPAN)
- Improved readsettings for recordable media
- Supports running GC games at Wii diskspeed
- GC Audiostreaming Fix
- Supports full-size DVD and DVD9 discs for GC homebrew
- Supports GC multigame discs
- Supports Wii and GC multidisc games
True stealth mode
- Does not modify RAM, making it virtually undetectable for the Wii
- Full command set emulation
Important: D2Ckey is designed to modify your Wii game console. However, Wii was not designed with D2ckey or any other mod chip in mind. While every effort has been taken to ensure that D2Ckey is compatible with a broad range of media and drives there is no guarantee that any given media or game will work on a specific drive. There are a number of factors beyond the scope of D2Ckey functionality that affects media compability, such as the laser diode and other internal circuitry in the dvd drive.
Wii D2C Mod chip Solution - INFECTUS2 - which can be used on any console including PS3.
How to make back up copy Wii games
Q. Hey Modchip-wizard how do I make backups of my Wii games or can you even burn wii games?
A. The LG GDR-8164B is the only DVD-ROM drive available today that you install in your PC that can read Wii original Games. These DVD Rom Drives for PC can easily read both Dual layer and single layer formats. After ripping the data you can then use any Dual Layer DVD Burner to burn wii games to make backups of your original games. Verbatim 4.7Gig & Dual Layer discs work fine. Config Discs can be burned to single layer discs.
Not all NTSC original ( or NTSC copies ) games work on a modded Wii - If you want to make a backup of an NTSC original game for use on a modded PAL Australian Wii console the game must be PAL Patched before burning the game disc. Some downloadable Wii game Isos give the option of which region patch has been applied.
There is also a SD Card Data tranfer method - using the Wii SD Gecko - and boot disc you can copy the wii game entirely onto the SD card ( in chunks ) from the Wii console , then you can transfer all the game onto your PC where a DVD burner can copy the game onto compatible DVD Media. Your mod chipped wii console can then play the back-up game.
How to know if your wii backup image file is okay before you burn it
- Wii ISOs are exactly 4.699.979.776 bytes. Some Wii ISOs are 4.700.012.544 bytes; they work fine.
- Wii ISOs with 4.736.698.368 bytes are scrambled images. They need to be unscrambled before burning.
- Gamecube ISOs must be exactly 1,459,978,240 bytes.
|
.........
|
